Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Printed Circuit Board Assembly & PCB Design Forum

16,900 threads related to PCB assembly and Surface Mount Technology

Check box next to thread to receive posts via email

SMT Production & Design Forum	Author	Updated	Comments	Views
Rephrase : mixed technology criteria.		10/11/99	2
Top Side BGA Reflowing @ Wave Solder		10/11/99	6
Losing parts in wave		10/11/99	9
Trays - Conductive vs Anti-Static??		10/11/99	3
Surface mount socket savers		10/10/99	2
Dross characteristic		10/09/99	3
Gold plating thickness on gold finger		10/09/99	4
How to solve the con. covered with flux		10/09/99	2
Panasonic Feeders MVII and MPA		10/08/99	5
bottom side epoxy		10/08/99	7
help help! Water clean for CSP/BGA package		10/08/99	13
PCB Cleaning		10/08/99	3
Pay scale		10/08/99	5
Pay scale		10/07/99	8
BGA shifting		10/07/99	4
Solder Paste Trial		10/07/99	4
SOT-23's Stencil Geometry		10/07/99	3
Mil-P-22809		10/07/99	1
Mixed technology criteria		10/07/99	1
Getting started with SMT		10/07/99	4
Use of chip bonding adhesive.		10/06/99	2
0402 part identification		10/06/99	2
adhesive for ptfe boards		10/06/99	6
HELP!! via sizes, location		10/06/99	3
HELP!! via sizes location		10/05/99	1
double sided step by step		10/05/99	5
Double Sided Reflow - Components on Bottom Side		10/04/99	1
Double Sided Reflow - Components on Bottom Side		10/04/99	1
reflow/cure/wave for double side assembly		10/04/99	4
Gold Repair		10/01/99	4
Panasoinc MV/MSH feeders		10/01/99	4
pwb design service needed		10/01/99	3
BGA Pre and Post Soldered Height Tolerances		10/01/99	1
Very high interconnect density		10/01/99	5
Missalingment 0402 Capasitor by Vision on TCM1000		10/01/99	3
Immersion Gold		10/01/99	5
Fuji America's instruction on PST file		10/01/99	1
I'm gone		10/01/99	1
Help! 2-layered Thru-Hole PCB Solder Mask/Soldering Problem		09/30/99	5
Process Trial Records		09/30/99	2
SIPAD are you using them?		09/30/99	1
just a test		09/30/99	1
Re: IR Versus Hot Air - Put-Up Your Dukes...........Not a lot of blood guys!!!		09/29/99	5
BGA Warp		09/29/99	6
Part orientation in carrier tape		09/29/99	2
No follow up, no participation		09/29/99	2
Solder pasted applied by PCB manufactuer		09/29/99	3
Re: Thanks - Earl , Wayne , Scott and Wolfgang		09/29/99	4
Web Email Problem Resolved		09/29/99	2
opinion of these rework stations		09/29/99	3