Specifications Using for the various screws adhesive with Anaerobic Adhesive
1)locks bolts ,prevents tampering stops corrosion
2)seals welds ,seals threaded pipe ,seals nicked threads
• Glue will evenly dispensing inside the screw
• Position place adjustment convenience
• Dispensing end can ...
|
|
Appling Scope
The dispenser is suitable to dispense 1:1 A, B liquid adhesive
Key Features
1.Have a big capacity cartridge, make the time of importing materials minimum, reduce waste.
2.Adopted with the TH-900J two components manual valve, can control the flow conveniently. ...
|
|
Appling Scope
The machine is suitable for the adhesive which the dispensing volume is big .Also suitable for the products which are required high precision
Key Features
1. Have a big capacity cartridge, make the time of importing materials minimum, reduce waste.
2. Adopted with ...
|
|
Appling Scope:
Apply for very high volume products. Precision Tolerance: 0.00005S
Key Features:
1 Automatic compensation function for elimination volume tolerance with liquid Level gap.
2. Microcomputer time control technology, four LED digital display
3.Fast teach function ca...
|
|
Appling Scope:
For needs to select the more different quantity deposit on the sole work piece the product to suppose.
Precision Tolerance:0.001S
Key Features
1.The digital dispenser has three modes of operation (manual, timed and cycling), the dosing time and cycle time and a...
|
|
The TH-2004kB has a bright four-digit LEDscreen and automatically cycle, "teach & learn" function suitable to dispense for mass production or for the products which are required high precision. Precision Tolerance:0.001S
Features:
1.Manual, Timer, or Cycle Operation Modes
...
|
|
The TH-2004kT has a bright LCD screen and "teach & learn" function,Suitting high precision dispense product. Repeatability is 0.001S
Features:
1. has a bright four-digit LED screen.
2."have tech&learn" function, operator can learn the setting knowledge is easily.
3...
|
|
This dispenser Designed for wide range of applications, and provides a simple and economic solution to fluid dispensing. The unit can either be controlled with a foot pedal or a finger switch for hand-held dispensing applications.
. Min deposit is 0.005ml
Features:
1. Has an analog time...
|
|
1. May realize the two component liquid Automatic ratio, automatic mixing and automatic dispensing according to the procedure in advance
2. The feeding system quote large-capacity storage system can continuous feed material, the mixing end cleaning is easy.
3. have TH-700J valve, rock ...
|
|
1. Ten dispensing end can Synchronous work.
2. Trimming Fixture with precision to change the pitch with dispensing end .
3. It independent control each dispensing end to close and open, dispensing volume.
4. The computer integration control, the operation is simple, easy to study to...
|
|
1. The machine Special design for the IC sealing technical.
2. Heating temperature control device with Japan. Keep the temperature between dispensing end and basic board. Tolerance +/-1��
3. Directly take the COB black glue into the tank, pick-and-place easy. without cleaning
4. Clos...
|
|
1. High precision quantification supplier liquid system.. Dispensing tolerance accuracy is 0.0001ml
2. CCD image magnification listing, "+"target precision piston programming can ensure that Dispensing positional accuracy.
3. Japan imports servo system, good stability, high repetition ...
|
|
1. Using two large-capacity feeding system, double heads and synchronous operations increase productivity
2.CCD assisted with the programming function, According to oneself products can be pre-set number of enforcement procedures at any time convenient call
...
|
|
1. The machine is designed for fast dispensing placement accuracy and repeatability without the expense for fast dispensing placement accuracy and repeatability ,even without the expense of coordinated X.Y moving ,it seamlessly integrates windows based, same quote the advanced CCD (camera) techn...
|
|
Appling Scope
The machine is used for precise dispensing or mass production.
Key Features
1. The auto-cycling function can reduce labor intensity and increase the production.
2. The digital dispenser has three operating modes (manual, timing and cycling)
3. The vacuum suck-back...
|
|
1.For controlling of small flow and low-middle viscosity materials
2.Syringes storing material, it can be used for precise dispensing
3.The question of fluid level affecting the dispensing volume has been solved fully.
4.The material of the parts touched fluid is corrosion-resistant and f...
|
|
1.Suitable for low and middle viscosity materials
2.The material of valve's body has been hardened.
3.The latest technology of diaphragm has been applied.
4.The material of the parts touched fluid is corrosion-resistant and flexible.
5.The liquid can't flow backward
6.Can interrupt t...
|
|
Dongguan TianHao Automatic Equipment CO., LTD is the first manufacturer of fluid controlling system in China. The precise dispensing systems are applied in dispensing all kinds of adhesives, sealants, lubricants and other assembly fluids accurately and consistently. Virtually they are used in every ...
|
|