Scheugenpflug Inc.

Specializes in automated metering & dispensing solutions, supplier of resin metering systems, global expert in production and process automation, vacuum dispensing production systems, and systems for dispensing of abrasive media.

Manufacturer

Scheugenpflug is a leading provider of adhesive bonding, dispensing and potting systems and a global expert in production and process automation. Our products range from standard and custom systems, to comprehensive solutions that automate the processing of resins (polyurethane, silicone, epoxy, and more). Our adhesive bonding and dispensing technology is best used for conveying and handling of substrates, material dispensing under atmospheric pressure or vacuum with the confidence of quality and functionality checks.

The focus is always on the customer's requirements and satisfaction. Today, Scheugenpflug systems are used by leading manufacturers in the automotive, electronics, telecommunications, medical technology, aerospace, alternative energy, and chemical industries.

Apart from our headquarters in Neustadt/Germany, we currently maintain four additional locations in the U.S., China, Mexico, and Romania.  The company also offers a global sales and service network, ranging from Spain to South Korea.

Scheugenpflug specializes in automated metering and dispensing solutions, supplier of resin metering systems, global expert in production and process automation, vacuum dispensing production systems, and systems for dispensing of abrasive media.

Scheugenpflug Inc. Postings

13 products »

LiquiPrep LP804 TT preparation and feeding unit

Harnessing gravity LiquiPrep variant uses gravity for high-viscosity materials The higher the viscosity of a material, the greater the demands it places on its preparation and feeding in d...

Dispensing

LiquiPrep LP804 TT preparation and feeding unit

High Performance Dispenser - DosP DP2001

The DosP DP2001 piston dispenser provides a solution for the industry requirements of Automotive Electronics, Industrial Electronics, Medical Electronics and Consumer Electronics for the shortest cycle times and highest dispensing qualities. It al...

Dispensing

High Performance Dispenser - DosP DP2001

Dos GP Gear Pump Dispenser

Rugged, fast and consistent – even with high inlet pressures Dos GP systems are the first choice for applications requiring 1C, high viscosity, unfilled, non-abrasive potting material, making them the best cho...

Dispensing

Dos GP Gear Pump Dispenser

Low Volume Piston Dispenser - DosPL DPL2001

The Allround Solution for Low Volume Applications Whether bonding, sealing, filling or heat dispensing, their simple, robust design makes piston dispensers the systems of choice for many different tasks. They also cover a...

Dispensing

Low Volume Piston Dispenser - DosPL DPL2001

Dos P-X Multi-Piston Dispenser

Ultimate performance with a small footprint Multi-piston dispensers are used for the output of large batch quantities and for short cycle times. These systems can pot several workpieces in a single potting cycle. They a...

Dispensing

Dos P-X Multi-Piston Dispenser

DispensingCell DC803

Scale UP your performance! The DispensingCell DC803 is a new high-performance multifunction cell for demanding dispensing applications. The cell was specially designed for series pr...

Dispensing

DispensingCell DC803

LiquiPrep LP804 Material Preparation and Feeding Unit

Pump UP your material quality! There’s no denying it: Electronic components have to work. An optimal dispensing performance as well as an absolutely homogeneous and bubble-free material are the prerequisites f...

Dispensing

LiquiPrep LP804 Material Preparation and Feeding Unit

A280 with TCA head

For highly viscous, abrasive, and filled materials in straight walled 5 gallon buckets or 20l pails.  Coupled with our special TCA metering head is designed for thixotropic Thermally Conductive Materials with higher viscosities.  Low sys...

Dispensing

A280 with TCA head

Cartridge Expulsion Unit A90 CV

Up to 90 Percent Less Material Waste per Cartridge Change Scheugenpflug has further developed the proven material feeding unit for dispensing applications with high viscosity materials and low media consumption: Th...

Dispensing

Cartridge Expulsion Unit A90 CV

DispensingCell - The Entry-Level Solution for Dispensing Applications

The system includes a 3-axis-system and a light curtain as well as the proven Dos P016 and the cartridge expulsion unit A90 C with filling level monitoring. Advantages Fast start of production...

Dispensing

DispensingCell - The Entry-Level Solution for Dispensing Applications

See all products from Scheugenpflug Inc. »

14 technical articles »

Maximal Performance Through Vacuum Potting

Jul 28, 2021 | Scheugenpflug

The performance of electronic components is compromised by factors such as bubbles in the potting medium. Increasing numbers of applications – particularly in the automotive and electronics industries – therefore require completely bubble-free dispensing methods. This is where potting in a vacuum comes into focus. The widespread school of thought about this technology is that it is too complicated, too expensive and too slow. But a closer look shows that this view is incorrect. This is a mastered technology. As for costs, the calculation basis is key, since usually the potting and vacuum method is only considered after the required potting quality cannot be achieved reliably any other way. Under total cost of ownership assessments, higher system costs no longer play a key role, since component failure would result in much higher subsequent costs. And now there are proven solutions for high production volumes and/or shorter cycle times. This whitepaper explains when potting in a vacuum is ideal for your projects and what to be aware of....

Selective protection for PCBs

Feb 18, 2020 | Scheugenpflug

Glob Top, Dam and Fill & Flit Chip Underfill To protect PCBs from damaging outside influences, they are coated with a thin layer of casting resin or protective finish during the conformal coating process. In addition to sealing the entire circuit board, it is possible to pot only sections or individual components on the substrate. Different methods ranging from "glob top" to "dam and fill" and "flip chip underfill" have been developed for this purpose....

Process Engineering - Why is preparation of adhesive bonding and potting materials necessary?

Feb 14, 2020 | Scheugenpflug

To meet the steady increase in technical requirements for electronic components, potting media properties must be extremely precise. Rheology, viscosity, filler content and curing behavior are only a few of the factors that play a role in their practical use. However, the growing complexity of materials often negatively impacts the ability to process or dispense them. In this case, material preparation and feeding systems specially designed for this purpose are required. These systems optimally prepare the material for the actual application and ensure homogeneous feeding to the dispensing system....

How to achieve optimum results in automated dispensing

Feb 13, 2020 | Scheugenpflug

Efficient bonding, sealing and potting has a major influence on the sustainable function and safety of electronic components. The key to success here lies in the comprehensive view and control of process engineering. Here it pays to seek collaboration with the systems and the material manufacturer during the very early stages of the project. This is because dispensing systems must be selected for compatibility with the workpiece and the adhesive, sealant or potting compound used. And there are also other factors that play an important role in designing the optimum dispensing system:...

Autonomous Driving - New systems to optimally apply potting media

Oct 17, 2019 | Scheugenpflug

There has been an increase in sealing and encapsulation applications mainly in the field of autonomous driving. Safety and assistance systems already make driving safer and more comfortable today. With increasing progress even more electronic systems will be added. The smooth functioning of computers, sensors, cameras, etc. - and thus our safety as road users - also depends on optimally applied potting media. These can be applied economically, quickly and with high quality in individual applications and are now mastered. With the changing mobility concepts, however, the prerequisites in manufacturing are changing. The requirements are often not fixed at the outset, but only develop during the course of the project. The aim here is to generate a flexible standard that enables attractive pricing and short delivery times. However, we are prepared for these developments: with our modular system consisting of scalable system modules. From this, individual processes can be taken and combined according to requirements. Our new LiquiPrep systems have recently become part of this modular system. They represent a further development of the proven A310 product family and enable reliable processing and conveying of self-levelling media. In addition to a significantly more intuitive operation, the LiquiPrep systems also offer higher performance thanks to a new, patented membrane pump and an optimized agitator. Image: Optimally applied sealants and casting materials form the basis for high quality and smooth functioning of the components. ...

The prerequisites for tomorrow's technologies

May 29, 2019 | Scheugenpflug

Scheugenpflug focuses on e-mobility and autonomous driving and, with its high-quality dispensing solutions, is accompanying an imminent turn of events in the growth field of mobility....

Conformal Coating - Sealing PCBs

May 01, 2019 | Scheugenpflug

"Sealing" in dispensing and potting technology describes a process in which sensitive electronics surfaces are coated with a very thin layer of casting resin or protective varnish. It serves to protect against environmental influences and corrosion, resulting in a longer service life and operational reliability of the components. To ensure that the material is distributed homogeneously across the surface, this well-known "conformal coating" process is employed using low-viscosity casting resins....

Adhesive Bonding Instead Of Welding Or Bolting

May 01, 2019 | Scheugenpflug

Adhesive bonding involves the use of adhesive to form a material bond between two or more assembly parts. In addition to regular adhesive bonding applications, hybrid processes, in which the adhesive bond includes another function such as sealing or heat dissipation, are gaining importance. Traditional joining methods such as welding or bolting are progressively being replaced in industrial applications by efficient adhesive bonding processes, since these processes provide a number of advantages such as part weight reduction or simplified parts handling....

Optical Bonding

Jan 10, 2019 | Scheugenpflug

We notice that the quantities of material that are to be dosed are becoming more and more divergent. In addition to large media volumes, small and very small quantities are also increasingly coming into focus. For example autonomous driving: These vehicles already produce an immense amount of data today. When potting the associated sensors, cameras, and ECUs, it is important to ensure a precise and repeatable media application – even with volumes of only 0.03 ml. In contrast, when high-voltage batteries for electric cars are potted, 5 to 10 litres of heat-conducting paste are required per vehicle – and the trend is rising. Optical bonding used in display production, on the other hand, is in the medium volume range. The challenge now is to cover the entire volume spectrum reliably and in compliance with the required cycle times. This is remedied by a modular system of scalable modules, which offers the customer the necessary flexibility and enables him to plan a system according to his needs....

Moisture and Bubble-Free Material Preparation in Larger Quantities

Sep 10, 2018 | Scheugenpflug

Issue: Moisture and bubbles in your dispensing material with larger quantities Solution: Scheugenpflug’s 55-gal Barrel Agitator Station Barrel agitators for casting resins take their technology from the paint sector. They fall short of meeting the special demands of the auto, medical, aeronautics and electronics industries. They can’t guarantee a solid seal on the barrels – often containing expensive, moisture sensitive resins – allowing the humidity of the surrounding environment to damage the material. Also, conventional barrel agitators, as opposed to smaller units, cannot work in a vacuum to process materials directly....

4 more technical articles from Scheugenpflug Inc. »

13 news releases »

Driving Automation: Scheugenpflug adds an inspection system to its portfolio

Feb 22, 2022 | Quality monitoring as an integral part of the dispensing cell saves time and space

Bonding Coverlens Touchsensor Fronts - Innovative plant technology to speed up the manufacturing process

Jan 05, 2022 | Following the everyday operating habits of smartphones and tablets, the control units of industrial plants are now equipped with touch screens. The Siemens plant in Amberg is a multiple award-winning location where around 5,000 employees manufacture Simatic and Sirius products for the automation industry using state-of-the-art production technology. This also includes operating and monitoring devices for industrial applications in logistics and mechanical engineering. In line with its claim to be an innovation location, the site decided to install a Scheugenpflug dispensing system to bond Coverlens Sensor Fronts for industrial plant control displays.

Two trailblazing dispensing solutions for the electronics markets

Nov 15, 2021 | Performance leap in dispensing speed and for the smallest quantities - Scheugenpflug presents two trailblazing dispensing solutions for the electronics markets at productronica 2021

Virtual TechDay - June 29, 2021

Jun 11, 2021 | Join us to our 1st Virtual TechDay on June 29th, 2021. Registration is free.

New DispensingCell DC803: Highest performance in series production

Jul 17, 2020 | Scheugenpflug offers a new, powerful cell solution for demanding dispensing tasks. The DispensingCell DC803 was specially designed to meet the requirements of industrial series production with high quantities and short cycle times. It can be flexibly adapted in scope of features and degree of automation and can be used both as a stand-alone and inline variant.

Scheugenpflug is now part of Atlas Copco

Jan 17, 2020 | Scheugenpflug AG is now part of the Swedish industrial group Atlas Copco. The closing of the purchase agreement took place on January 2, 2020, after the competition authorities had also approved the planned acquisition. The existing Managing Board of the dispensing technology specialist is strengthened by Olaf Leonhardt as new Chairman of the Managing Board.

Scheugenpflug AG becomes part of Atlas Copco

Oct 25, 2019 | The specialist for adhesive bonding, dispensing and potting technology will be part of the Atlas Copco Group in the future. Scheugenpflug will be integrated as an independent company into the "Industrial Assembly Solutions" (IAS) division of Atlas Copco.

TechDays 2019 at Scheugenpflug

Aug 13, 2019 | The focus of this year's TechDays held by Scheugenpflug AG from June 5 to 6, 2019, was entirely on future technologies: the fifth run of the traditional in-house fair offered a varied program from dispensing solutions for e-mobility to optical bonding all the way to automation and process integration. The Scheugenpflug Academy was presented this year for the first time.

Top 100 Award: Scheugenpflug among the Innovation Leaders 2019

Jul 02, 2019 | On June 28, 2019, Scheugenpflug AG was honored as a top innovator at the 6th German SME Summit for the first time. The TOP 100 seal of approval was presented in Frankfurt’s Jahrhunderthalle by author and science journalist Ranga Yogeshwar. Neustadt/Donau, July 1, 2019: At the 26th edition of the independent innovation competition TOP 100, Scheugenpflug AG for the first time made the leap among the best: On June 28, 2019, the specialist for adhesive bonding, dispensing and potting technology was honoured with the TOP 100 seal at the 6th German SME Summit. The award was presented by Ranga Yogeshwar, mentor of TOP 100, innovation researcher Prof. Dr. Nikolaus Franke and compamedia. Using a scientific system, TOP 100 evaluates the innovation management and the resulting innovation successes of medium-sized companies. The award ceremony took place in the Jahrhunderthalle in Frankfurt.

The prerequisites for tomorrow's technologies

Jun 13, 2019 | Scheugenpflug focuses on e-mobility and autonomous driving and, with its high-quality dispensing solutions, is accompanying an imminent turn of events in KENNESAW, GEORGIA. Digitalization, e-mobility, autonomous driving, industry 4. 0 and energy system transformation: Many of today's megatrends would be unachievable without safe, reliable electronics. These electronics are becoming smaller, more complex and more powerful, and at the same time the demands on their longevity and reliability are increasing. Modern adhesives, sealants and encapsulants are used to protect these components from harmful influences in the long term. The systems for the application of these materials to the components were supplied by Scheugenpflug AG, headquartered in Neustadt/Donau. The product and technology range of the East Bavarian company, which has branches in the USA, China, Mexico and Romania and employs a total of just under 600 people, is diverse: In addition to dispensing systems and systems for material preparation and feeding, it also includes customer-specific inline and automation solutions.

3 more news releases from Scheugenpflug Inc. »

IPC Certification Training Schedule IPC Questions and answers

Comprehensive Analytical Services and Support