Relative Humidity Dependence of Creep Corrosion on Organic-Acid Flux Soldered Printed Circuit Boards
Published: |
May 9, 2018 |
Author: |
Haley Fu - iNEMI, Prabjit Singh - IBM Corporation, Dem Lee, Jeffrey Lee - iST-Integrated Service Technology, KarlosGuo, Julie Liu - Lenovo, Simon Lee, Geoffrey Tong - The Dow Chemical Company, Chen Xu - Nokia |
Abstract: |
Creep corrosion on printed circuit boards (PCBs) is the corrosion of copper metallization and the spreading of the copper corrosion products across the PCB surfaces to the extent that they may electrically short circuit neighboring features on the PCB. The iNEMI technical subcommittee on creep corrosion has developed a flowers-of-sulfur (FOS) based test that is sufficiently well developed for consideration as an industry standard qualification test for creep corrosion. This paper will address the important question of how relative humidity affects creep corrosion. A creep corrosion tendency that is inversely proportional to relative humidity may allow data center administrators to eliminate creep corrosion simply by controlling the relative humidity in the data center,thus, avoiding the high cost of gas-phase filtration of gaseous contamination. The creep corrosion relative humidity dependence will be studied using a modified version of the iNEMI FOS test chamber. The design modification allows the achievement of relative humidity as low as 15% in the presence of the chlorine-releasing bleach aqueous solution. The paper will report on the dependence of creep corrosion on humidity in the 15 to 80% relative humidity range by testing ENIG (gold on electroless nickel), ImAg (immersion silver) and OSP (organic surface preservative) finished PCBs, soldered with organic acid flux.... |
You must be a registered user to talk back to us. |
Company Information:
More articles from iNEMI (International Electronics Manufacturing Initiative) »
- Sep 08, 2021 - iNEMI Pb-Free Alloy Characterization Project Report: Part II - Thermal Fatigue Results For Two Common Temperature Cycles
- May 13, 2021 - iNEMI Project on Process Development of BiSn-Based Low Temperature Solder Pastes
- Apr 08, 2021 - Investigation of Factors That Influence Creep Corrosion
- Apr 08, 2021 - Qualification Test Development for Creep Corrosion
- May 08, 2019 - Cold Ball Pull Test Efficiency for the PCB Pad Cratering Validation with the Ultra Low Loss Dielectric Material
- See all SMT / PCB technical articles from iNEMI (International Electronics Manufacturing Initiative) »
More SMT / PCB assembly technical articles »
- Apr 11, 2022 - iNEMI Webinar 07.07.2021 - PCB Cleaning | ZESTRON Americas
- Jan 28, 2022 - Open Radio Unit White Box 5G | Whizz Systems
- Nov 10, 2021 - Understanding the Cleaning Process for Automatic Stencil Printers | ITW EAE
- Oct 20, 2021 - PCB Surface Finishes & The Cleaning Process - A Compatibility Study | ZESTRON Americas
- Oct 06, 2021 - Cleaning Before Conformal Coating | ZESTRON Americas
- Browse Technical Library »
Relative Humidity Dependence of Creep Corrosion on Organic-Acid Flux Soldered Printed Circuit Boards article has been viewed 836 times