How to inspect the temperature recovering time of thermal shock chamber?
Published: |
November 12, 2019 |
Author: |
climatest symor |
Abstract: |
Thermal shock test chamber can be used for testing the chemical change or physical damage on composite materials caused by the thermal expansion and contraction of the sample in the shortest time,which is subjected to extremely and continuous high and low temperature environment.so how to check the temperature recovery time of this chamber? Normally we take following steps to inspect the temepratuire recovering time: 1.Install the temperature sensor at the specified position, and adjust the temperature controller of hot zone and cold zone to the required nominal temperature respectively. 2.The temperature increases and reduces respectively,30min after temperature in two zones reach stable status,record temperature value of the measuring point,pls set the temperature value of two zones to be required nominal temperature. 3.The temperature shock test chamber automatically places the inspected load into theh ot zone,select the corresponding retention time according to regulated standard. 4.Set the transfer time,then the inspection load is transferred from hot zone to cold zone, and the temperature of the measuring point is observed and recorded, and then the reverse conversion of the load from cold zone to hot zone is carried out according to the same method, and the temperature of the measuring point is observed and recorded. www.climatechambers.com... |
You must be a registered user to talk back to us. |
Company Information:
More articles from Symor Instrument Equipment Co.,Ltd »
- Dec 16, 2019 - Factors determine the price of temperature humidity test chamber
- Dec 13, 2019 - Difference between Neutral and Acid Salt Spray Corrosion Test
- Dec 12, 2019 - What causes temperature humidity chamber to alarm?
- Nov 20, 2019 - Why salt spray chamber fail to spray salt mist?
- Nov 17, 2019 - Maintenance and operation of walk-in temperature humidity test chamber
- See all SMT / PCB technical articles from Symor Instrument Equipment Co.,Ltd »
More SMT / PCB assembly technical articles »
- Apr 11, 2022 - iNEMI Webinar 07.07.2021 - PCB Cleaning | ZESTRON Americas
- Jan 28, 2022 - Open Radio Unit White Box 5G | Whizz Systems
- Nov 10, 2021 - Understanding the Cleaning Process for Automatic Stencil Printers | ITW EAE
- Oct 20, 2021 - PCB Surface Finishes & The Cleaning Process - A Compatibility Study | ZESTRON Americas
- Oct 06, 2021 - Cleaning Before Conformal Coating | ZESTRON Americas
- Browse Technical Library »
How to inspect the temperature recovering time of thermal shock chamber? article has been viewed 359 times