SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Gen3 Systems to Exhibit New SIR and CAF Systems with Ascentech LLC at the IPC APEX EXPO

Gen3 Systems to Exhibit New SIR and CAF Systems with Ascentech LLC at the IPC APEX EXPO

Feb 02, 2015

AutoSIR 2 Measurement system.

AutoSIR 2 Measurement system.

Gen3 Systems Limited, a specialist British manufacturer and distributor, today announced that it will exhibit at the IPC APEX EXPO alongside its North American Distributor Ascentech LLC.  Gen3 Systems will be present on Booth #1028 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center, San Diego, and will introduce new and improved products for electronics manufacturing at the trade show.

GEN3 has redesigned its line of Surface Installation Resistance Testers (AutoSIR) and Conductive Anodic Filament Monitoring Testing System (AutoCAF)

The key features of both the NEW AutoSIR 2 and AutoCAF 2 Measurement systems provide the following product enhancements:

  • Measurement Time: 256 Channels <8 seconds
  • Applied Voltage: +1V to 1000V
  • Measurement Range: 106 ω to 1014 ω
  • Measurement Method: Continuous on all selected tests
  • Measurement Test Intervals: Fully selectable from minimum of one minute
  • Capable of testing to all existing test specifications IPC - IEC - JNC and other user specifications

Unlike the original instruments, the use of switch relays is eliminated so that, when the test and measurement voltages are the same, truly continuous monitoring and measurements can be made.
Measurements may be taken at test intervals that are fully selectable from a minimum of one minute. Each channel is current limited (1 Mω), ensuring that Electro-Chemical Reactions (Dendrites) are preserved for subsequent failure analysis. The frequent monitoring capability provides a full picture of the electro-chemical reactions taking place on a circuit assembly, and provides early trend analysis enabling tests to be curtailed, thus saving considerable test time and money.

Both the AutoSIR 2 and AutoCAF 2 Systems are available with 64, 128 or 256 channel configurations.

Graham Naisbitt, Managing Director of Gen3 commented, “The features of the new AutoSIR and AutoCAF instruments provide significant performance improvements at a highly competitive price. Much of the developments were achieved through our participation on a major CAF Research Project conducted by our NPL. We believe that the ability to measure from 256 test channels in less than 8 seconds is industry-leading and the IPC APEX EXPO is the perfect Launchpad for these new products.” 

Gen3 also will exhibit the Gensonic Stencil Cleaning System, awarded the European Product of the Year at Productronica 2013, which is a manual operated ultrasonic transducer unit for cleaning stencil apertures.

The Gensonic can be used either in conjunction with Gen3’s Stencil Cleaning Centres or is portable enough to be taken directly to the printer thereby greatly reducing production downtime and printer resetting.

The Solder-Saver offers companies that use wave soldering the opportunity to instantly recycle dross created in the wave solder pot, thereby saving up to 50 percent in new solder bar purchases. It can be used with tin – lead alloy or lead-free alloy wave soldering machines.

Also available in Gen3’s manufactured product line is the Ionic Contamination Systems, also known as the CM Series, Dip and Spray Coating Systems, MUST III Solderability Testing System (wetting balance), Wizard Thermal Profiling and Solder Paste Inspection. 

For more information about Gen3 Systems, visit www.gen3systems.com.


Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field. In addition, the company designs and manufactures dip and spray coating process equipment in both in-line and bench-top formats. Gen3 is a specialist distributor for several leading equipment manufacturers including, ACE, DIMA, FineTech, MBTech, MEK, Optilia and, most recently, Global Distributor for Aprotec Instrumentation, Solder Paste Inspection (SPI) systems.

Gen3 Systems also provides training, equipment and expertise for manufacturers requiring assessment of their electronic products’ reliability. The company also operates a test service and assists with standards development via both the IPC and IEC. Gen3 Systems operates from premises near Farnborough Business Park, on the M3 corridor and just 30 minutes from London’s Heathrow Airport.

Ascentech, LLC is a North American Distributor of Products and Services for Electronics Manufacturing and Printed Circuit Board Fabrication. Ascentech is the North American Distributor for GEN3 Systems, and supplies the industry with other product reliability test equipment including the MUST III -Solderability test systems (wetting balance), Auto-SIR -Surface Insulation Resistance test, CM-Series - Cleanliness test (ionic contamination), and the SPA-1000-Solder Paste Analyzer. To learn more about the company visit www.ascentechllc.com

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

May 30, 2022 -

GEN3 provides the solution for Printed Circuit Board Assembly for Stewart Technology Ltd

May 05, 2022 -

Gen3's Dr Chris Hunt, CTO to Present at SMTA Electronics in Harsh Environments Conference

May 05, 2022 -

Gen3's Dr Chris Hunt, CTO to Present at SMTA Electronics in Harsh Environments Conference

Mar 23, 2022 -

Gen3 provides key tools for electric vehicles

Mar 23, 2022 -

Gen3 provides key tools for electric vehicles

Jan 25, 2022 -

Gen3 Systems announces product line up for Southern Manufacturing 2022

Mar 09, 2021 -

GEN3 Expansion to Meet Demand

Dec 13, 2018 -

NEW: AutoSIR2 + and AutoCAF2+ Optimising Test Flexibility

Nov 01, 2018 -

Gen3 Systems appoints Emma Hudson as their CTO

33 more news from Gen3 Systems »

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Nozzle Cleaning Machine HJS-390,SMT Nozzle Cleaning Machine

See electronics manufacturing industry news »

Gen3 Systems to Exhibit New SIR and CAF Systems with Ascentech LLC at the IPC APEX EXPO news release has been viewed 668 times

  • SMTnet
  • »
  • Industry News
  • »
  • Gen3 Systems to Exhibit New SIR and CAF Systems with Ascentech LLC at the IPC APEX EXPO
ICT Total SMT line Provider

Inline Cleaning Machine Hydro-clean Array